Tires are easy to overlook until one looks low or starts wearing unevenly. A little regular attention makes those problems easier to catch before they disrupt a normal commute or a longer trip. Start with the pressure recommendations for your car, then build a routine around checking tread, looking for damage and following the rotation schedule. These checks work best together: a tire can have plenty of tread and still need attention.

Get the pressure number right

Use the tire pressure listed in your owner's manual or on the vehicle's tire information placard. On many cars, the placard is on the driver's door frame or inside the fuel filler flap. The maximum pressure printed on the tire sidewall is not the recommended setting for your car. Read the vehicle instructions carefully rather than assuming every tire needs the same pressure.

Check pressure when the tires are cold, at least once a month and before a long trip. A convenient habit is to check before the first drive of the day. Use a pressure gauge and compare each reading with the vehicle's recommendation, then adjust as needed. Do not rely on appearance alone. Under-inflated tires can wear faster, increase fuel use and overheat, so a tire that looks acceptable still deserves a measurement.

Measure tread instead of guessing

Tread deserves a closer look than a quick glance at the outside edge. Use a tread depth gauge and check several spots across each tire and around its circumference. This helps reveal differences that a single measurement could miss. A penny or other coin can provide a rough check, but a gauge gives a clearer measurement and makes it easier to track changes over time.

Legal minimum tread depths vary by country, so check the rules where you drive. Many places set the minimum at 1.6 mm, but do not assume that figure applies everywhere. Treat a coin test as a quick screening method, not proof that a tire meets local requirements. If the tread is getting close to the applicable limit, plan for replacement.

Look for damage and uneven wear

While checking tread, inspect the visible sidewalls and tread surfaces for cracks, bulges, embedded nails and uneven wear. Make this part of the same monthly routine so it is less likely to get skipped. If something looks damaged or unusual, have a tire professional assess it rather than waiting until the next scheduled service.

Pay attention to differences between tires and across individual tread surfaces. Uneven wear can point to an alignment or suspension issue. Simply noting that one tire is wearing faster is useful information to bring to a shop. A rotation may help distribute normal wear, but an unusual wear pattern also needs its cause investigated.

Follow the rotation schedule

Rotating tires at the interval specified in the owner's manual can help even out wear. Check the instructions for your particular car instead of choosing a schedule based on someone else's vehicle. Keep a simple record of the date and mileage whenever a rotation is completed.

If a shop handles the work, ask it to check for uneven wear at the same time. Combining these tasks makes the appointment more useful and helps you keep track of developing problems.

Keep age and seasons in mind

Tires age even when they still have plenty of tread. The date code on the sidewall shows when a tire was made, so include age in maintenance decisions rather than judging condition by tread depth alone. Seasonal tires also suit different temperatures. When planning a seasonal change, take the opportunity to review pressure, tread, visible condition and age together.